Whether to provide custom processing 
 Be 
 Model 
 VIN-ML-30W 
 Type of light source 
 LED integrated high-power 
 Source power 
 70 (W) 
 Voltage 
 85 ~ 265 (V) 
 Shade type 
 Aluminum 
 The main scope of 
 Factories, indoor 







 1 Features 

 The product life is more than five times the energy-saving lamps, power consumption is 1/3 to 1/4 of the ordinary energy-saving lamps, fast response, no ultraviolet radiation, environmental protection and the advantages of a wide range of uses. 

 2. Icon 







 3 Specifications 
 Project Name 
 Specification 
 Product Type 
 VIN-DC01V100 
 Product Specifications 
 Ф420mm × H460mm 
 Ambient temperature 
 -15 - +50 ℃ 
 Life of 
 40 000 H- 
 Luminous color 
 Is white 
 Degree of protection 
 IP 
 LED type 
 LED High Power 
 LED quantity 
 1PCS 
 Color temperature 
 Is white 4000-6300K 







 4 The main optical parameters 
 Project Name 
 Specification 
 Input voltage 
 AC100-260V 
 Operating frequency 
 50-60HZ 
 Power factor 
 0.95 
 Power 
 30 ~~ 100W 
 Total luminous flux 
 7000-8000lm 
 Color temperature 
 5800-6300K 
 Color rendering index 
 Ra> = 70 
 Beam Angle 
 50 ° 
 Operating Temperature 
 -20-40 ℃ 
 Temperature (room temperature 25 ° C) 
 ≤ 50 ℃ ° 
 The use of humidity 
 ≦ 90% 
 Storage Temperature 
 -20 ~ +40 ° C 





 (5) to install and use instructions 

 1, the product is not waterproof, for indoor use only, please note that the waterproof moisture; 

 2, radiators and vents shall not be covered with debris, light body with walls or other items required to maintain a distance of 20cm in order to facilitate the lamp body heat; 

 3, when used in the environment of dust particles more attention to cleanliness; 

 4, the lamp away from inflammable and explosive materials; 

 5, the light source to focus, to avoid to look straight into the lamp and the illuminated object distance is greater than 3m; 

 Do not in a very short period of time, continuing to open and close the light source, otherwise it will affect the life of light source; 

 7, continuous light, do not touch the heat sink surface, so as not to burn; 

 During transport Note that shock, avoid the extrusion of the poly mask and light source, check the installation and re-tighten the screws; 

 9, the maximum temperature of 40 °, such as the ambient temperature is higher than 40 °, continuous light will affect lamp life; 

 10, to keep the lens clean to prohibit the unauthorized demolition lens, to avoid any dust debris in contact with the LED light source, or easily burned light or fire; 

 11, regularly check and keep the radiator clean, remove the radiator surface and the dust of the lamp body 

 12, the power of this product, please regularly check indoor electrical circuit.